As he explain, the A125 (maybe others) are in 3.3v levels, which is not TTL compatible (and is also different from a RS-232 serial cable !!! don’t use a serial cable directly on it as it have a +_15v signal amplitude which may destroy your Amino. Actualy I did this without destroying it… but still….).

Again, use this at your own risk… we are not responsible.

It can handle « display » templates, which can be added to the plugin Views or simply in your theme. That’s what I’m working on right now for the Photo Theme I’m using in my new Photo Blog.
This way you don’t have to install another plugin and use hooks.

While it’s working well, it still have some features missing.

One of the missing stuffs is beeing able to display GPS data.
My photo blog have Geo-Tagged pictures. I want to be able to display them along with a google map image so my readers can see where it was taken. I also want to display some of the EXIF informations, like lense type, aperture, shutter speed and so on…

While some of them (most) are already handeled by the NextGen gallery, some of them are not.
NextGen Gallery is using the exif_read_data function to get the data from the file like :

Then, the RAW exif datas are separated in arrays. When trying to access the EXIF tags (using get_EXIF), only the part of the array under [EXIF] will be used. In fact this is partly false, as the get_EXIF function also dig under IFD0 and WINXP.
As the GPS data from my Nikon D700 are under the [GPS] array, there is no chance that NextGen gallery sees them even if you use the wordpress filter to add some new EXIF tags.

Then you only have one solution : check in the RAW meta-data or… change NextGen so it can handle them in the EXIF tags stored in the database.

So, my solution is divided in few parts :

• Hardcode some new EXIF tags
• get the GPS data inside get_EXIF
• add a function to parse the GPS data and make them readable/usable by Google Map

Let’s do it :

Hardcode some new EXIF tags

In the file lib/meta.php, change the get_common_meta function so it look like :

As you can see, I add all the GPS data, plus « lense », which is just a hook as the EXIF tag for the lense is actualy « UndefinedTag:0xA434″

You can also add the new tags in the i8n translation function

get the GPS data inside get_EXIF

Now, every time you insert a new image or re-import the meta-data, the new tags will be asked. We need to change the get_EXIF function so it can find them.
Still in lib/meta.php, go down to the get_EXIF function and change it to  :

You can see two things here :
- if the meta asked is « lense », we look for the un-named attribute
- when we are done with EXIF and IFD0, we check in the GPS array

add a function to parse the GPS data and make them readable/usable by Google Map

Now we create the function to re-calculate the GPS coords. Create a function somewhere in the class. A good place is at the end of the lib/meta.php file, just before the last closing bracket.

Conclusion

Re-importing the meta-data of all your pictures should add the new stuffs.

I’v posted in the WordPress forum and asked for this to be added to the NextGen Gallery dev tree. Still have no answer for now. Maybe someone will come with a better code or better idea ?
I also asked for someone to check how GPS data are included in files from other brands as I can only tell for the Nikon’s D700.

My last reseller sent me the 110 firmware while I had some dead STB. This is what I will use for this tutoriel.

So, the firmware comes as a tar file. Mine is A110-0.15.1-fresco-ami_wm-euro-subs.tar .

First, you need to create some directories. Please, note I’m actualy doing this on a PC running Ubuntu 7.10. The ~ stands for your home directory. It can be anything else you want, just change the paths accordinately. Of course, you don’t need to install things in /usr/local AT ALL, which is a really bad way to do things anyway.

Now you can untar your image. Mine is just a .tar but yours could be a .tgz or .tar.gz. Then use option zxvf instead of xvf :

This will create a directory 0.15.1-A110-fresco-ami_wm-subs-1. Go into it :

You can now create and sign the two files you need for an upgrade : a bootstrap and an image.

The bootstrap

The password is « markskey« . You will get a OK message and a new file : bootstrap.signed

Copy this new file to the image directory :

The BONUS

Before we create the signed image of the real OS, I will show you how you can customize the boot procedure.
In the upgradeimage/imagecomponents directory lies all the files that will be packaged in the OS. Of course you can add few files. Don’t oversize the image or it won’t be able to be used.
Inside this directory you will find a splash.gif image file.

You can replace it by any GIF image. Don’t use an image bigger than the TV resolution, around 720×480. Replace the image but keep the same name ! Also, I think you have a limited number of possible colors, and the first color (?) will also be used for the backgroud around the image (can you confirm that ?)
So, have fun, change files, pre-program you amino by changing the config files… play around

The OS Image

If you have closed your terminal, re-set the CUSTOMER_KEY and PATH variables as above.
Now create and sign the image. As suggested, if you are making an Opera firmware upgrade, une -z for compressing the image

The DHCP Server

Yes, you will need one… But you already have my previous post on this : http://www.lecentre.net/blog/archives/119
See my config below as I finaly found out that my first config was « wrong« 

The Multicast Server

This server can be anything… the one provided with the image or anyone, like VLC (yes, the video player…).
Go in the server directory and edit the

Match the <mcast address> and <port number> with the ones from the DHCPD config file :
Here is my file :

Start the upgrade

Now you are ready to start. Go in the image directory and start the multicast software :

You can now plug in your set top box and see the magic…
Or not…
I just found out that the DHCP config file may not be right, depending on your Amni revision. While the original Vendor-Name is « aminoAMINET110mboot », this can change.
The solution I found was to trace the IP (bootP) packets on the lan and see what is going on. I use tcpdump for that.
This is also the point where I will describe my setup :
My host have 2 network card. Eth0 is connected to the local LAN and is using a dhcp client to get an IP. I’m connecting to it using SSH from my Mac, where I write this blog post at the same time.
The other network card, eth1, is connected to a switch where I plus the set top box. As the multicast packets of the mcastbootd only goes out by the first interface, eth0, I had to use a special command to configure eth1, so the multicast goes on it. Here is the whole config command.
Of course, if you are local on the host and have only one ethernet card, you won’t have to do this :

The IP 10.20.0.2 is just part of the DHCP range I set up but outside the pool.
Then, to get the « vendor name » used by the set top box to ask for bootp/dhcp, I used tcpdump on eth1, then plugged in the amino and power it. Here is the result :

What is all this mess ?
In fact, you don’t care !
The only important part is Vendor-Class Option 60, length 26: « insecureAMINET11xmboot1.32″. This is what you have to set in your dhcpd.conf so it will find the amino, give it the IP and params so it can find the broadcast server.
So, here is my dhcpd.conf file, right from the Ubuntu dhcpd.conf + amino specials :

Now, restart dhcpd server, plug the amino and power it… and VOILA !!
I hope this is clear enough for you. Please comment if you need more details. Just remember it’s now 22:00 and I started all this at 19:00, so please don’t ask too newbie questions.

You should already know this.

Feedburner is a tool, newly acquired by Google (one more) which will, by the aim of a plugin to your blog software, redirect people reading your RSS to their site. This will substentialy reduce the load of your server. This will also collect some stats helping you to see who is subscribed.

I think many other features exists but I’m just too new to know all. Just have a look at their blog here.

It really seems « feed » is the new word on internet, with the latly relase FriendFeed tool, agregating all of your social network other tools… cool isn’t it ?

For those of you who don’t have it yet, you can listen to GTA radios online :

Or check the others here at http://www.rockstargames.com/IV/#?page=music&content=stations

Know what a Set-Top-Box is ? By this time everybody should know. This little box you plug to your TV so you can see video channels or VoD (Video On Demand) streamed from another computer or from your ISP.

We had a project at work about replacing TV in almost every office, connected to coaxial cable, by a network based system. This have two advantages, and only one drawbacks :

• It is netwok based and you are not limited with the number of channel
• You can also watch TV on your desktop or laptop computer, no need to have a TV
• It is nework based, so you need a real good network

As you understand, the last point is the bad side of the change. For my company it was a pain as ethernet cables had to be changed… $$$$

Then we had a buch of Anevia Flamingo/Sunbird to stream TV channels from satellite or internal broadcasts. These appliances are pretty cool, not that expensive, and almost reliable. I’m waiting for the new firmware so we will have access t new features, as SNMP for monitoring. This way we have almost 50 TV channels from all around the world.

Finaly, we installed VLC player on every desktop, with a SAP server for broadcasting channel lists.
The last part was giving a Set Top Box (STB) to every people using a TV (almost journalists).

The first choice was Amino STB.

This is once again small and easy to use. At first….
Where it comes tricky is when you have to configure 100 of these at the same time. For that you have multiple choices : tftp, multicast tool, telnet or using the « web » interface with a infra-red keyboard.

One thing you can do is power up your 100 Amino and use the IR keyboard. Then the IR commands will reach every STB and they all be configured identicaly at the same time.

This is, of course, not the best solution.

Another solution we had since then was using a home made Python script to change the config (mainly the IP config and the channel list) of one Amino at the time.
You just have to start a dhcp server, plug-in the Amino, get it’s IP from the DHCP lease and start the script with the IP in parameter. The script then connect with telnet (Login : root, Pass : root2root by default) and update the conf files (located in /mnt/nv) to set a static IP and the list of channels.
Why do we set static IP’s ? Because our multicast network for TV is not connected to the rest of the network and have no server (DHCP) on it.

This solution have 2 main drawbacks :

1. the IP is static, we have to increase it every time we setup a new Amino, and remember it
2. The channel list is also static

This is really a pain if you want to upgrade something once the amino is on production. This solution still have a benefit : knowing the IP enables you to search for it’s location or state.
We had last week a « stolen » Amino. We quickly found that the IP of the amino was still present on the network and been able to get it back. In fact, I think we didn’t. We were not looking for the right one. One amino was really stolen….

While we heard it was possible to configure the Amino with a DHCP server plus a web page, we had no documentation on how to do this. I found few things on Internet, like dhcpd.conf files, but none of them was working.
I finaly got one working fine with ISC DHCPD server (v4). And this is the purpose of this article. You will see this is pretty easy when you have the right information.

First, compile ISC DHCPD. This ain’t so hard, but the damn awfull ISC documentation won’t help you much. See my other post on DHCPD failover if you need this.

Change the configuration to add you IPs pool and the special Amino options :

# options for amino set-top-box
option space AMINO;
option AMINO.address    code 1 = ip-address;
option AMINO.port       code 2 = integer 16;
option AMINO.product    code 3 = text;
option AMINO.option     code 4 = text;
option AMINO.version    code 5 = text;
option AMINO.middleware code 6 = ip-address;
option AMINO.mw_port    code 7 = integer 16;
option AMINO.homepage   code 8 = text;
option AMINO.dindex     code 9 = integer 32;
option AMINO.dindex_min code 10 = integer 32;
option AMINO.dindex_page        code 11 = text;

# declaration des groupes de set top box amino 110
class "AmiNET110 all" {
# match if (option vendor-class-identifier="insecureAmiNET11xmboot1.32") or
# (option vendor-class-identifier="Aminoaminet110fisys");

match if (option vendor-class-identifier="Aminoaminet110fisys") or
((substring( option vendor-encapsulated-options, 2, 9)="aminet110")
and (substring(option vendor-encapsulated-options, 13, 5)="fisys"));

vendor-option-space AMINO;
option AMINO.homepage "http://172.16.12.41/portal/tv.html";
}

This needs explanations :

Options are just the list of possible option you will use, and theire type
the Match part is used to tell the DHCP to give the option only if the client is an Amino. Depending on your Amino flash it may not claim himself as Aminoaminet110fisys. Just use a tcpdump like application to trace that. If you have 103, you may change this also. You will find a sample dhcpd conf on the VLC forum.

The option AMINO.homepage should define a web page the amino can reach.

For the pool, still in the dhcpd.conf file :

shared-network IPTV {
subnet 172.20.0.0 netmask 255.255.252.0 {
option subnet-mask 255.255.252.0;
option domain-name "groupertl.net";
option domain-name-servers 172.16.12.10;
option routers 172.20.3.254;
option broadcast-address 172.20.3.255;
option ntp-servers 172.16.12.22;
pool {
failover peer "dhcp-failover";
deny dynamic bootp clients;
range 172.20.2.70 172.20.2.250;
allow members of "AmiNET110 all";
}
}
}

The failover line is to use only if you use failover. Everything else is self-explanatory.

Then comes the tricky part. The HTTP web page giving the channels list. I finaly chose to use a dynamic generation of the page using a json table. This will change as soon as we have a Django provisionning tool for that, which will generate a static page when needed. Our dev team will also try to add overlay, channel name, programs… but that’s another story. I even don’t know if the Amino can handle that

So here we go :

Once again this is pretty simple :

• Create a json table. id is the id channel, nom is the name of the channel, uri is the URL and logo is the html path for the channel's logo.
• use a for loop to add a ASTB.SetChannel line for each channel
  ASTB.SetChannel(channelID, channelURL), like : ASTB.SetChannel(1,igmp://239.1.1.1:1234)
• use another loop to create a pretty page with channel's logo

And there you go.

Please, comment

Le principe est simple : On choisi des critères on reçoit un « parcours  » musical. Après on peut passer d’une chanson à l’autre, spécifier si on aime la chanson ou pas, etc.

Je vous laisse decouvrir ici : http://www.musicovery.com/

One new API from Google. This one allow you to create charts (graphiques, pour les francophones).

Philippe Mougin is our guest and comes with a clean example with integration to Apple’s Cocoa programming. Check this here.

As usual in any new linux distro, Apache is not installed the same way as the previous. on ubuntu, you’ll find a bunch of files and directory in /etc/apache2.
I ended searching on « how can I add the LDAP authentication module, authzn_ldap. This module is in the mods-available directory.

One solution seems to link it to mods-enabled directory.
Or you can use the (new to me) utility ‘a2enmod’, which stand for Apache2 Enable Module. you also have a2dismod to remove a module or a2dissite to remove a site (if your site conf is in the /etc/apache2/site-available directory.

I haven’t been waiting for Ubuntu to offer that as I’m doing such a thing for almost 8 years now. Moreover, and this is something I would like to release one day, all my apache vhost conf is stored in Ldap, and managed through a set of PHP pages. I just have to change the conf from the web interface and clic « dump conf », and every modified entry is dumped to the right file, and the link is made or removed automaticaly if needed.
Wait for it…

fi yuo cna raed tihs, yuo hvae a sgtrane mnid too
Cna yuo raed tihs? Olny 55 plepoe out of 100 can.
i cdnuolt blveiee taht I cluod aulaclty uesdnatnrd waht I was rdanieg. The phaonmneal pweor of the hmuan mnid, aoccdrnig to a rscheearch at Cmabrigde Uinervtisy, it dseno’t mtaetr in waht oerdr the ltteres in a wrod are, the olny iproamtnt tihng is taht the frsit and lsat ltteer be in the rghit pclae. The rset can be a taotl mses and you can sitll raed it whotuit a pboerlm. Tihs is bcuseae the huamn mnid deos not raed ervey lteter by istlef, but the wrod as a wlohe. Azanmig huh? yaeh and I awlyas tghuhot slpeling was ipmorantt! if you can raed tihs forwrad it

FORWARD ONLY IF YOU CAN READ IT